Masonry Sand

Masonry Sand, also widely known as mortar sand or brick sand, is a clean, uniform, fine-grained material essential for precision construction and hardscape projects. Because it is washed and screened to a consistent, fine particle size, this sand is the standard choice for mixing with cement to create smooth mortar for bricklaying, stone masonry, and leveling pavers.

Beyond construction, its fine texture makes it a reliable material for filling gaps between paver joints, creating level beds for flagstone projects, or even top-dressing certain high-maintenance lawn areas where fine drainage is required.

Not recommended as structural base material under heavy loads.

🧮 Skip the Guesswork: Unsure how many yards to order? Avoid purchasing mistakes or shorted projects by utilizing our interactive material calculator positioned directly at the top of this product page. Simply input your area's total length, width, and your desired material depth in inches to get an instant volume requirement for a secure, confident checkout.

Applying masonry sand correctly ensures that your hardscape projects remain level and structurally sound over time. Follow these straightforward beginner installation rules:

Paver and Stone Bedding

1. Prepare the Sub-Base: Ensure your primary base layer (typically road base or crushed limestone) is compacted and solid before adding any sand.
2. Spread the Sand: Distribute the masonry sand across the base at a uniform depth of 1 inch. This provides the perfect "screed" layer for your stones or pavers to sit on.
3. Screed Flat: Use a long, straight board or a custom screed tool to pull the sand until the surface is perfectly flat and level. Do not walk on the screeded sand layer after it is leveled.
4. Place Pavers: Gently set your pavers or stones onto the sand base. Avoid pressing down too hard initially, as this will disturb the level surface.

Joint Filling

1. Sweep Dry: Ensure the pavers are completely dry before applying sand.
2. Fill the Gaps: Pour the fine sand over the paver surface and use a wide broom to sweep the material back and forth across the joints.
3. Compact and Refill: Once the gaps are full, use a plate compactor to vibrate the pavers. This settles the sand deep into the joints. Sweep more sand into any gaps that appear after compaction and repeat until all joints remain full and solid.
   
   

Cubic Yard Coverage Estimate

• 1 Cubic Yard: Covers roughly 160 square feet at a 2-inch depth.
• 1 Cubic Yard: Covers roughly 100 square feet at a 3-inch depth.
• 1 Cubic Yard: Covers roughly 80 square feet at a 4-inch depth.

Masonry sand is a highly specific, fine-grade material engineered for projects requiring a clean, uniform finish:

• Mortar and Masonry Mix: Acts as the primary fine-aggregate base when mixed with cement to create the smooth mortar needed for brick, block, and stone wall installation.
• Paver and Flagstone Base: Creates a stable, level leveling course that sits between the hard crushed-rock base and the finish stone/paver surface.
• Joint Sand: Fills narrow joints between pavers or natural flagstone pieces, locking them into a solid, unified surface that resists shifting.
• Lawn Top-Dressing: Occasionally used as a fine top-dressing on ultra-fine turf grasses to improve soil texture and assist in localized leveling of minor surface dips.

Managing a fine sand layer is straightforward, focusing on preventing erosion and keeping joints full:

1. Joint Maintenance: Periodically check your paver joints. If you notice sand washing out over time, simply sweep a fresh layer of dry masonry sand back into the joints to keep the surface stable and prevent weed growth.
2. Preventing Washout: In heavy rain areas, ensure your finished paver or flagstone project is properly edged with concrete or steel edging to hold the sand base and joint material in place.
3. Weed Control: While masonry sand is clean, wind-blown seeds can still settle in the joints. Apply a high-quality polymeric sand or use a dedicated paver sealant periodically if you want to lock the joints and fully prevent weed germination.

Material Type: Washed, screened, and fine-graded masonry sand.

Common Names: Mortar Sand, Brick Sand, Fine Masonry Sand.

Texture Profile: Consistent, fine-grained, and free of large rocks or debris.

Application Suitability: Ideal for mortar mixing, paver leveling, and joint filling.

Local Logistics: Available for home and commercial jobsite delivery throughout Austin, Kyle, San Marcos, and surrounding ZIP codes. Can be bundled onto a single delivery order with loose gravels, mulches, or cut hardscape stone blocks.

This sand is designed for finish work and smooth application.

What is Masonry Sand?
Masonry sand, also known as mortar sand or brick sand, is a finely screened, washed sand. It is used primarily for mixing mortar for masonry construction or as a stable leveling and joint-filling base for paver and natural stone patio projects.

How much masonry sand do I need?
To figure out your material requirements, multiply the total length of your area by the total width to establish your square footage. Once you know your measurements, the easiest and most precise way to find your volume requirement is to plug your numbers directly into our convenient cubic yard calculator at the top of this page. It automatically calculates the exact volume based on your preferred project depth.

Can I use this for playground sand or sandboxes?
While this is a clean, washed sand, it is specifically graded for construction use. If you are building a sand area for play, you may want to check our other sand options, as masonry sand has a finer texture that may pack differently than sand specifically washed for children's play areas.

Can I order bulk masonry sand along with pavers or limestone for the same delivery?
Yes! Yards Direct makes it easy to bundle your landscape materials online. You can place your order for masonry sand on this page and add our limestone chop blocks, pavers, or natural flagstones to your cart for a single, coordinated delivery straight to your property.